1. Character of Microcrystal Wear resisting Alumina Lining:
According to different customers'needs, raw materials of the prodcuts are strictly controlled in order to ensure that the product not only takes on good wear-resistant, corrosion-resistant, but also rich size. The service life can be extended at least five years, which is 15% more efficient than a rubber liner. Also, it prevents pollution to the grinded material and increases the capacity of mill ball, resulting in cost cut.
2. Application:
(a)As wear-resisting lining of coal-electing equipment on coal industry
(b)As lining of fall funnel, lining of wear-resisting pipe and bender, etc. Parts of equipment in themal or power plants
(c)As lining of material tranfer pipe and chute, etc, on steel industry.
3. A set of wear resisting alumina tile:
(a)Microlite wear resisting alumina lining pieces
(b)Microlite wear resisting alumina perforated lining plate/tile
(c)Microlite wear resisting alumina Arc lining Plate/tile
(d)Microlite weat resisting alumina Trapezoid lining plate/tile
4. Rich size of wear resisting alumina tile
Length(mm)× Width(mm)× Height(mm)
(a)10 * 10 * /4-10
(b)17.5 * 17.5 * /4-10
(c) 20 * 20 * /4-10
(d)120 * 80 */10-20(Wear-resisting Perforated or Non-Perforated Lining Board)
(e)110 * 37/34 * 12(Wear-resisting Pipe(Traperzoid)Lining Board)
(f) 130 * 50/47 * 12(Wear-resisting Pipe(Traperzoid)Lining Board)
(g)150 * 100 * /10-25.4(Wear-resisting Perforated or Plain Lining Board)
(h)150 * 60/57 * 10/12(Wear-resisting Pipe(Traperzoid)Lining Board)
(j) 100 * 81.6/78.5 * 20(Wear-resisting Arc Lining Board)
Remark: Can volume-produce according to the customers' requirements.
| Performance Index |
92 series |
95series |
| Al2O3 (%) |
≥91.5 |
≥94.5 |
| Moh's Hardness |
9 |
9 |
| Water Absorption Rate(%) |
0.02 |
0.02 |
| Fracture Toughness(Mpa) |
3.65 |
3.75 |
Bending
strengh(Mpa) |
255 |
275 |
| Bulk density(g/cm 3 ) |
≥ 3.60 |
3.65 |
Audited Supplier 
){kind=link}